? semiconductor components industries, llc, 2010 august, 2010 ? rev. 4 1 publication order number: mpsw55/d mpsw55, mpsw56 one watt amplifier transistors pnp silicon features ? pb ? free packages are available* maximum ratings rating symbol value unit collector ? emitter voltage mpsw55 mpsw56 v ceo ? 60 ? 80 vdc collector ? base voltage mpsw55 mpsw56 v cbo ? 60 ? 80 vdc emitter ? base voltage v ebo ? 4.0 vdc collector current ? continuous i c ? 500 madc total device dissipation @ t a = 25 c derate above 25 c p d 1.0 8.0 w mw/ c total device dissipation @ t c = 25 c derate above 25 c p d 2.5 20 w mw/ c operating and storage junction temperature range t j , t stg ? 55 to +150 c thermal characteristics characteristic symbol max unit thermal resistance, junction ? to ? ambient r ja 125 c/w thermal resistance, junction ? to ? case r jc 50 c/w stresses exceeding maximum ratings may damage the device. maximum ratings are stress ratings only. functional operation above the recommended operating conditions is not implied. extended exposure to stresses above the recommended operating conditions may affect device reliability. *for additional information on our pb ? free strategy and soldering details, please download the on semiconductor soldering and mounting techniques reference manual, solderrm/d. http://onsemi.com ?for information on tape and reel specifications, including part orientation and tape sizes, please refer to our t ape and reel packaging specifications brochure, brd8011/d. mpsw56rlrp to ? 92 2000/ammo pack mpsw56rlrpg to ? 92 (pb ? free) 2000/ammo pack mpsw55rlrag to ? 92 (pb ? free) 2000/tape & reel device package shipping ? mpsw55g to ? 92 (pb ? free) 5000 units/bulk ordering information x = 5 or 6 a = assembly location y = year ww = work week = pb ? free package (note: microdot may be in either location) marking diagram mps w5x ayww collector 3 2 base 1 emitter 1 2 3 1 2 bent lead tape & reel ammo pack straight lead bulk pack 3 to ? 92 1 watt (to ? 226) case 29 ? 10 style 1
mpsw55, mpsw56 http://onsemi.com 2 electrical characteristics (t a = 25 c unless otherwise noted) characteristic symbol min max unit off characteristics collector ? emitter breakdown voltage (note 1) (i c = ? 1.0 madc, i b = 0) mpsw55 mpsw56 v (br)ceo ? 60 ? 80 ? ? vdc emitter ? base breakdown voltage (i e = ? 100 adc, i c = 0) v (br)ebo ? 4.0 ? vdc collector cutoff current (v ce = ? 40 vdc, i b = 0) mpsw55 (v ce = ? 60 vdc, i b = 0) mpsw56 i ces ? ? ? 0.5 ? 0.5 adc collector cutoff current (v cb = ? 40 vdc, i e = 0) mpsw55 (v cb = ? 60 vdc, i e = 0) mpsw56 i cbo ? ? ? 0.1 ? 0.1 adc emitter cutoff current (v eb = ? 3.0 vdc, i c = 0) i ebo ? ? 0.1 adc on characteristics (1) dc current gain (i c = ? 50 madc, v ce = ? 1.0 vdc) (i c = ? 250 madc, v ce = ? 1.0 vdc) h fe 100 50 ? ? ? collector ? emitter saturation voltage (i c = ? 250 madc, i b = ? 10 madc) v ce(sat) ? ? 0.5 vdc base ? emitter on voltage (i c = ? 250 madc, v ce = ? 5.0 vdc) v be(on) ? ? 1.2 vdc small ? signal characteristics current ? gain ? bandwidth product (i c = ? 250 madc, v ce = ? 5.0 vdc, f = 20 mhz) f t 50 ? mhz output capacitance (v cb = ? 10 vdc, f = 1.0 mhz) c obo ? 15 pf 1. pulse test: pulse width 300 s, duty cycle 2.0%. figure 1. dc current gain i c , collector current (ma) 400 -0.5 -0.7 -1.0 -2.0 -3.0 -5.0 -7.0 -10 -20 -30 -50 -70 -100 -200 200 100 80 60 40 h fe , dc current gain t j = 125 c 25 c -55 c v ce = -1.0 v -300 -500
mpsw55, mpsw56 http://onsemi.com 3 i b , base current (ma) figure 2. collector saturation region v ce , collector-emitter voltage (volts) -1.0 -0.8 -0.6 -0.4 -0.2 0 -0.1 -10 -1.0 t j = 25 c i c = -10 ma -0.05 -0.2 -0.5 -2.0 -5.0 -20 -50 -100 ma -250 ma -500 ma -50 ma i c , collector current (ma) figure 3. ?on? voltages v, voltage (volts) -1.0 -0.8 -0.6 -0.4 -0.2 0 t j = 25 c v be(on) @ v ce = -1.0 v v ce(sat) @ i c /i b = 10 -0.5 v be(sat) @ i c /i b = 10 -1.0 -2.0 -5.0 -10 -20 -50 -100 -200 -500 i c , collector current (ma) figure 4. base ? emitter temperature coefficient -0.8 -2.8 -1.0 -100 -10 vb for v be -0.5 -2.0 -5.0 -20 -50 -200 -1.2 -1.6 -2.0 -2.4 vb , temperature coefficient (mv/ c) -500 c, capacitance (pf) figure 5. capacitance v r , reverse voltage (volts) -100 -50 -20 -10 -5.0 -2.0 -1.0 -0.5 -0.2 -0.1 100 70 50 30 20 5.0 t j = 25 c c obo c ibo 10 7.0 v ce , collector-emitter voltage (volts) -2 k -1.0 i c , collector current (ma) mpsw55 -2.0 -5.0 figure 6. current ? gain ? bandwidth product current limit thermal limit second breakdown limit -500 -200 -100 -50 -20 -10 -10 -20 -60 -80 -100 mpsw56 100 s 1.0 ms 1.0 s t c = 25 c t a = 25 c dc dc -1 k duty cycle 10% i c , collector current (ma) -200 -70 -50 -30 -20 -10 -7.0 -5.0 -3.0 -2.0 200 100 70 50 20 v ce = -2.0 v t j = 25 c f, current-gain bandwidth product (mhz) t -100 30 figure 7. active region ? safe operating area
mpsw55, mpsw56 http://onsemi.com 4 package dimensions to ? 92 (to ? 226) 1 watt case 29 ? 10 issue o style 1: pin 1. emitter 2. base 3. collector notes: 1. dimensioning and tolerancing per ansi y14.5m, 1994. 2. controlling dimension: inches. 3. contour of package beyond dimension r is uncontrolled. 4. dimension f applies between dimensions p and l. dimensions d and j apply between di- mensions l and k minimum. the lead dimensions are uncontrolled in dimension p and beyond dimension k minimum. r a p j l b k g h section x ? x c v d n n xx 1 notes: 1. dimensioning and tolerancing per asme y14.5m, 1994. 2. controlling dimension: inches. 3. contour of package beyond dimension r is uncontrolled. 4. dimension f applies between dimensions p and l. dimensions d and j apply between dimensions l and k minimum. the lead dimensions are uncontrolled in dimension p and beyond dimension k minimum. r a p j b k g section x ? x c v d n xx seating plane 1 t straight lead bulk pack bent lead tape & reel ammo pack dim min max min max millimeters inches a 0.175 0.205 4.44 5.21 b 0.290 0.310 7.37 7.87 c 0.125 0.165 3.18 4.19 d 0.018 0.021 0.46 0.53 f 0.016 0.019 0.41 0.48 g 0.045 0.055 1.15 1.39 h 0.095 0.105 2.42 2.66 j 0.018 0.024 0.46 0.61 k 0.500 --- 12.70 --- l 0.250 --- 6.35 --- n 0.080 0.105 2.04 2.66 p --- 0.100 --- 2.54 r 0.135 --- 3.43 --- f v 0.135 --- 3.43 --- dim min max min max millimeters inches a 0.175 0.205 4.44 5.21 b 0.290 0.310 7.37 7.87 c 0.125 0.165 3.18 4.19 d 0.018 0.021 0.46 0.53 g 0.094 0.102 2.40 2.80 j 0.018 0.024 0.46 0.61 k 0.500 --- 12.70 --- n 0.080 0.105 2.04 2.66 p --- 0.100 --- 2.54 r 0.135 --- 3.43 --- v 0.135 --- 3.43 --- on semiconductor and are registered trademarks of semiconductor components industries, llc (scillc). scillc reserves the right to mak e changes without further notice to any products herein. scillc makes no warranty, representation or guarantee regarding the suitability of its products for an y particular purpose, nor does scillc assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including wi thout limitation special, consequential or incidental damages. ?typical? parameters which may be provided in scillc data sheets and/or specifications can and do vary in different application s and actual performance may vary over time. all operating parameters, including ?typicals? must be validated for each customer application by customer?s technical experts. scillc does not convey any license under its patent rights nor the rights of others. scillc products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the scillc product could create a sit uation where personal injury or death may occur. should buyer purchase or use scillc products for any such unintended or unauthorized application, buyer shall indemnify and hold scillc and its of ficers, employees, subsidiaries, af filiates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, direct ly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that scillc was negligent regarding the design or manufacture of the part. scillc is an equal opportunity/affirmative action employer. this literature is subject to all applicable copyright laws and is not for resale in any manner. publication ordering information n. american technical support : 800 ? 282 ? 9855 toll free usa/canada europe, middle east and africa technical support: phone: 421 33 790 2910 japan customer focus center phone: 81 ? 3 ? 5773 ? 3850 mpsw55/d literature fulfillment : literature distribution center for on semiconductor p.o. box 5163, denver, colorado 80217 usa phone : 303 ? 675 ? 2175 or 800 ? 344 ? 3860 toll free usa/canada fax : 303 ? 675 ? 2176 or 800 ? 344 ? 3867 toll free usa/canada email : orderlit@onsemi.com on semiconductor website : www.onsemi.com order literature : http://www.onsemi.com/orderlit for additional information, please contact your local sales representative
|
